AutoEnginuity SP07 European Bundle is an excellent choice for independant shops, tuners & the Do it Yourself mechanic needing access to OBDII systems for help diagnosing problematic vehicles.

Enhanced interface for BMW and MINI 1996-2010 (EI07) ^{*2, *3}

Our enhanced BMW interface supports thousands of sensors and bi-directional controls selected from 190+ controllers such as engine (DME), transmission (EGS), ABS, airbags, and other body and chassis systems. With our enhanced BMW, we support translating BMW FC codes into OBDII DTCs for all engine and transmission controllers. Also, supported is such status information as the fault frequency and fault conditions.

Model Coverage:

• 1 Series E8X (2004-2010)
• 3 Series E36/E46/E9X (1996-2010)
• 5 Series E39/E60 (1997-2010)
• 6 Series E62/E63 (2004-2010)
• 7 Series E38/E65/E66 (1996-2009)
• X3 E83 (2004-2010)
• X5 E53/E70 (1999-2010)
• X6 E71 (2008-2010)
• M3 E36/E46/E9X (1996-2010)
• M5 E39/E60 (1999-2010)
• M6 E62 (2004-2010)
• MINI R50/R51/R53/R55/R56/R57 (2001-2010)
• Z3 (1998-2002) (1.9L, 2.0L, 2.2L, 2.3L, 2.5L, 2.8L, and 3.0L)
• Z4 E85/E86 (2003-2010)
• Z8 (1999-2003)

System Tests:

• Determine All Systems Present and Operating
• Display Service and Inspection Information
• Display Coding Information
• Self-Test (Safety and Information)
• Steering Angle Adjust (MK20, MK60, DSC 8 [E46, E90, E83, and MINI all models])
• Lateral Acceleration and Pressure Adjust (MK60 [E46 non-M models and MINI])
• ABS Bleed (MK60 [on E46 '03+, E85/E86, and MINI models])

Service Functions:

• Reset Airbag Light
• Register Replacement Battery (D80 and V80)
• Reset Oil Service Light (for all 9/2000+ models)
• Reset Service Interval Distance and Time (for all 9/2000+ models)
• Reset Conditional Based Service (E6X and E9X models)
• Reset DME, EGS, and RLS Adaptations
• Clear and Set Transport and Sleep Modes
• Teach In Clutch Slipping, Teach In Clutch Characteristic Curve, Teach Clutch Values, and Longitudinal Acceleration Sensor Offset (SMG II)

*Does not support BMW E38 750i 12 Cylinder DME, E36 96-99 M3 and 328is ABS, E36 M Coupe / M Roadster ZKE or IKE.

 Enhanced interface for Land Rover (EI10) 2002-2010 ^{*2, *3}

Our enhanced Land Rover interface supports hundreds of sensors and bi-directional controls selected from the engine, transmission, body, and chassis controllers. Coverage includes the Freelander (2002-2005), New Range Rover (2002.5-2010), LR2 (2007-2010), LR3 (2004-2010) LR4 (2010).

Advanced features besting even the factory solutions:

• View more then 16 sensors at one time
• Faster connections
• More PIDs available on most controllers
• Steering Lock Column Module fully integrated

Service Functions:

• Display Service and Inspection Information
• Display Coding Information
• Reset Service Interval Distance and Time (for '00+ BMW-based models)
• Reset DME and EGS Adaptions

*Does not support SII Reset for Ford-based models.

Enhanced interface for Jaguar (EI11) 1995-2010 *²

Our enhanced Jaguar interface supports hundreds of sensors and bi-directional controls selected from the engine, transmission, body, and chassis controllers. Coverage includes the XK, X Type, S Type, XJ, and XF models. Additionally, coverage includes the late model medium speed CAN (MCAN) controllers such as HVAC, Audio, Keyless Vehicle, Park Aid, Side Object Detection Control, Central Junction, etc.

Advanced features besting even the factory solutions:

• View more then 16 sensors at one time
• More intuitive and powerful user-interface
• OBD-II functionality integrated with Jaguar-specific functionality
• Faster connections
• More PIDs available on most controllers

Service Functions:

• Injector Coding (2.0L)
• Brake Sensor Setup
• Display Last Alarm Activations (SLM and GEM)
• Display Fuel Adaptation Tables
• Fuel Adaptation Monitor
• Electronic Parking Brake Release To Service
• Front And/Or Rear Light Calibration (ADHLS and HCM)
• Reset TCM Adaptations (most models)
• Yaw and Lateral Accelerometer Calibration
• Reset ABS Configurations
• System Self Test (SType Only GEM, REM, DDM, PDM)
• EVAP Leak Test (some ECM variations are not currently supported)

*Requires ProLine ST06 hardware for some XJ8 and XJR Airbag '98 - '03 and some CCM modules.

Enhanced interface for Porsche (EI13) 1994-2010 ^*2

Our enhanced Porsche interface supports live data, bi-directional actuations, system-level tests, and trouble code retrieval and clearing from 60+ systems. Coverage includes the popular 911 (1994-2009), Boxster (1997-2009), Cayman (2006-2009), Carrera GT (2005-2006), Cayenne (2003-2009).

With our enhanced Porsche, we support live data and drive links from more than 50+ controllers. If live data isn't enough, we have component-level actuations so you can test a component on your own terms instead of recreating the conditions for actuation. Finally, with Vehicle Data support (i.e., Ignition Ranges counters) you can see the state of your vehicle prior to repair or purchase.

Advanced features besting even the factory solutions:

• More intuitive and powerful user-interface
• OBD-II functionality integrated with Porsche-specific functionality
• VIN-based model decoding for rapid vehicle identification
• Plug-n-Play hardware requiring no device drivers
• Trouble code status byte decoding to assist in determining the nature of the fault
• English translations of fault codes

Service Functions:

• Event Memory (Airbag)
• Operating Hours (Airbag)
• Calibration (HBA and Air Conditioning)
• Events and Erase Events (Instrument Cluster)
• Events, Erase Events, and Reset (Instrument Cluster CAN)
• Display Module Information Display Vehicle Data (986/987/996/997)

Enhanced interface for Audi/VW (EI16) 1996-2010 *²

Our enhanced Audi/VW interface supports hundreds of sensors selected from the engine, transmission, ABS, airbag, and dozens of other systems. To help facilitate ease-of-use for this interface, we've allowed users to select as many sensors as they want. We also do not require that certain sensor groups to be selected in specific orders. We've also extended our support by allowing module coverage to be externally added by way of the Audi Information File (AIF). These files can be generated during a network test or during a module sensor mapping test and help extend the over all coverage of the interface untill such coverage can be built into the software. Many of the features that Audi/VW features offer are not consistent with other manufactures (i.e. Ford, GM) as they do not offer component-level actuations and the sensors vary based on installed modules. Like most aftermarket Audi/VW tools, some of the sensor descriptions are missing, but data values can still be retrieved with basic descriptions. It is therefore strongly recommend to use a service manual alongside our tool while working on these vehicles.

Advanced features:

• Adaptation
• ADC Channels
• Basic Settings
• Coding II/Login (7-digit PIN/SKC Not Supported)
• Gateway List (CAN)
• Login
• Module Information
• Module Recoding
  • Long Coding
  • Soft Coding
• Module Sensor Mapping
• Network Test
• Output Tests (Automatic and Specific)
• Optical Bus Diagnostics (CAN)
• SRI Reset
• Transport Active/Deactive Mode (CAN)

*Currently does not support EDC15 Mileage for diesel vehicles, Coding II, and Security Access. As well as any feature that might require the module to be unlocked first. UDS modules not supported at this time a beta is available contact tech support for access.

Enhanced interface for Mercedes (EI17) 1998-2010 *²

Our enhanced Mercedes interface supports thousands of sensors and hundreds of bi-directional controls for systems such as DME, EGS, ABS, AAC, BAS, SRS, WSS, EWS, CGW, ICM, DAS, MRM, LCP, UCP, OCP, SAM, and dozens more body and chassis controllers. Support includes systems on both the 16pin OBDII and 38pin interfaces.

Live data, bi-directional controls, and trouble code retrieval for the popular M and GL Class (163 / 164), SLK Class (170 / 171), C Class (202 / 203 / 204), CLK Class (208 / 209), E Class (210 / 211), CL Class (215 / 216), CLS Class (219), S Class (220 / 221), SL Class (230), B Class (245), R Class (251), G Class (463), and V Class(Viano/Sprinter). Trouble code retrieval only for DAS 3 equipped S Class (140) models currently.

Advanced Features:

• Display Adaptation Values (DME 2.0)
• Display ECU Information
• Reporting Status Byte and SubType codes
• VIN model decoding
• Support for D- and N-Codes
• Read and Clear Fault Codes/Events

Service Functions:

• Power Window Denormalization for DCM aand LCP controllers
• Reset ECU
• SBC Deactivation and activation
• Reset Sensor and Mixture Adaptation (ME2.8)
• Reset Adaptation Values, Cold Start Adaptation Values, and Activate Fuel Pump (ME9.7)
• Learn Throttle Valve Stop, Teach-In Ethanol Portion, and Reset Ethanol Teach-In Processes (ME9.7)
• Reset Quantity Mean Value Adaptation Data (CDI2 - CDI5)
• Reset Transmission Adaptations (EGS52, EGS53, and VGS2)
• Reset Service Interval ('03 and earlier with FSS only)
• Reset Oil Service ('03 and earlier with FSS only)
• Rodeo, Pitch, Roll, and Move Towards Calibrated Level functions (ABC and ABC230)

*Quick Test support coming soon.

The European ScanTool Bundle #SP07 Includes:

• ProLine Interface (ST06)
• Enhanced Expansion for BMW and MINI 1996-2010 (EI07) *2 *3
  
• Enhanced Expansion for Land Rover (EI10) 2002-2010 *2 *3
• Enhanced Expansion for Jaguar (EI11) 1995-2010 *2
• Enhanced Expansion for Porsche (EI13) 1994-2010 *2
• Enhanced Expansion for Audi/VW (EI16) 1996-2010 *2
• Enhanced Expansion for Mercedes (EI17) 1998-2010 *2

What AutoEnginuity's Scan Tool can do?

• Save, print, read and clear Stored and Pending P, U, B, and C Trouble Codes. Supporting P0 - P9 generic and manufacturer specific codes (including the new lettered codes (e.g., P06A0)
• The largest manufacturer specific trouble code library of all PC/PDA-based scan tools (30,000+)
• Read and clear Freeze Frame data
• View live vehicle sensors in a meter, graph, or grid format
• View oxygen sensor live data and test results
• View all 11 Inspection/Maintenance systems and Mode 6 data
• Unlimited logging of live vehicle sensors in TXT, XML, or CSV (1ms logging accuracy)
• Playback your data logs for offline analysis
• Run and query specific component and system tests. Support for generic and enhanced bi-directional tests
• View generic and manufacturer enhanced data on the same tool
• English or Metric (SI) units of measure supported
• Configure your sensors' ranges, scaling value, audible alert triggers, units, and sampling rate
• Savable configurations. Set up the interface to suit your preferences and save it so you never have to do it again
• Supports 1996 and newer passenger vehicles, whether it be domestic, Asian, or European.
• SAE interfaces: J1850 (PWM and VPM), ISO-9141-2, ISO-14230 [KWP2000], and CAN [11bit and 29bit]

Coverage on Demand:

It's a powerful concept pioneered by AutoEnginuity that allows you to purchase enhanced options as you need them. Since enhanced interfaces are software-based updates for our ScanTool line that, once purchased, can be activated through email. There is no extra installation or special hardware necessary. The enhanced interfaces come with free updates for the first 12 month period. There is no annual license fee and you can transfer your license to another PC if necessary. For another 12 months of updates, the cost is $100.00 USD. You are not required to purchase updates and can continue to operate the existing enhanced version for as long as you'd like. We release an average of 4 updates per 12 month period.

Legend

^*2Windows Mobile and Palm-based version not available.

^*3Enhanced interface comes with a special cable adaptor.