AutoEnginuity Asian ScanTool Bundle (SP06) is an excellent choice for independant shops, tuners & the Do it Yourself mechanic needing access to Asian OBDII systems for help diagnosing problematic vehicles.

Toyota, Lexus & Scion Support 1995-2010²

Our enhanced Toyota interface supports engine, transmission, body, and chassis systems. System support includes the bi-directional controls and system tests such as Test Mode (Zero Point Calibration) setting for TCS / VSC systems. Additionally this support includes the Generation 1 and Generation 2 hybrids systems such as HV Battery and HV ECU. For these systems we also do support the Information Data #s reported with trouble codes.

System Tests:

• Air Bleed -- Usual and Master Stroke (ABS)
• ECB Utility -- ECB Invalid, Zero Down, and Linear Valve Offset Calibration (ABS)
• Signal Check (Airbag, ABS, ABS CAN, EFI CAN, EHPS, EMPS, and TPWS)
• Reset Memory (EFI, EFI CAN, ABS, ABS CAN)
• Clear Records (EMPS and VGRS)
• Zero Point Init (EMPS)
• Sensitivity Check (OCC)
• Inspection Mode (ABS CAN)
• Test Mode -- Zero Calibration (ABS, ABS CAN, TPWS, and OCC)

Mazda 1996-2010²

Our enhanced Mazda interface supports hundreds of sensors selected from the engine, transmission, body, and chassis systems. Support includes the CAN systems such as ABS and Tire Pressure Monitor systems.

System Tests:

• IVD Initialization (Lateral Acceleration and Yaw Rate Reset)
• Self-Test (RCM and GEM)
• KOEO
• KOER
• Passenger Weight ReZero

Nissan & Infiniti 2000-2010²

Our enhanced Nissan interface supports code retrieval/resetting, sensors, and actuations from the engine, BCM, transmission, ABS, airbags, 4WD systems, and CAN systems. Coverage includes the Work Support configuration commands such as Target Idle Ignition Adjustment; with it you can permanently advance your ignition timing to gain few extra HP. Trouble code retrieval includes the NATS 5.0 system and the detailed status byte support. Finally, we seamless integrate CAN and non-CAN systems so that you won't have to worry about switching hardware to retrieve all the troubles codes from each module.

System Tests:

• Self-Diagnostic (Airbag)
• ECU Part Number (Airbag)
• Diagnostics Record (Airbag)
• Reset ECU (Powertrain)

Work Support/Configuration Functions (Some 01+ and Most '03+)

• Target Idle Ignition Adjustment
• Target Idle RPM Adjustment
• Idle Air Volume Learn
• Self-Learning Control

CAN Module Configurations:

• Door Lock Unlock Set
• Anti-Lock Out Set
• Set IL Door Unlock
• Room Lamp Off Time Set
• Room Lamp On Time Set
• Keyless Entry Horn Chirp Set
• Keyless Entry Hazard Lamp Set
• Keyless Entry Multi-Answer Back Set
• Keyless Entry Auto Lock Set
• Keyless Entry Panic Alarm Set
• Keyless Entry Trunk Open Set
• Keyless Entry Power Window Down Set
• Head Lamp Battery Saver Set
• Head Lamp Custom Light Setting
• Head Lamp Illumination Delay Set
• Wiper Speed Setting
• Security Alarm Set
• Theft Alarm Trigger Erase

Honda & Acura 1996-2010²

Our enhanced Honda interface supports hundreds of sensors and bi-directional controls selected from the engine (PGM), transmission (TCM), ABS, and airbag systems.

System Tests:

• ADS Damper Forced Operation
• ADS Jack-Up Stroke Calibration
• ATTS Lateral G And Yaw Rate Calibration
• ATTS Steering Angle Calibration
• Calibrates All Sensor (ABS Type 1 & 4)
• Crank Position Sensor Notch Learn
• DBW Throttle Carbon Clogging Reset
• DBW Throttle Carbon Clogging Status
• Engine Oil Replacement Reset
• OPDS Initialization
• OPDS Sensor Adjustment
• Reset Wheel Speed Pulse Counters (ABS Type 1 & 4)
• Resolver Zero-Position Offset Calibration
• SWS Initialization

Hyundai & Kia 1996-2010 ²

Our enhanced Hyundai and Kia interface supports hundreds of sensors selected from the powertrain, body, chassis, and transmission systems. Coverage includes the European counterparts such as the Azera, Enterprise, Picanto, Pride, etc. Finally, we support retrieving the ECM information block to view Boot Software Number, ECU Hardware Number, Programming Date, etc.

System Tests:

• EVAP Leak Test (Siemens 655 [Rev 17, 18, 19], 670 [Rev 8], Bosch COM 1.1)
• Reset Adaptions
• PODS Reset
• Read Block Information
• Steering Angle Calibration (ABS/ES 95660 [Rev 23 and 32])

Subaru 1999-2009²

Our enhanced Subaru interface supports hundreds of sensors selected from the engine, transmission, and late model ABS systems.

Permanent Functions:

• Retard Ignition
• Idle RPM Adjustments (with AC and without AC)

Mitsubishi 1996-2010* ²

Our enhanced Mitsubishi interface supports hundreds of sensors selected from the MFI, ABS, AT, Immobilizer, OCM, Meter, TPMS, airbag, and dozens of other systems.

Advanced features besting even the factory solutions:

• More intuitive and powerful user-interface
• Faster updates
• View more then 8 sensors are once

Special Functions:

• ECU Information (All CAN controllers)
• EVAP Leak Test (MFI CAN)
• EVAP Leak Monitor (MFI E200, E400, E500, E600, 1400, and 1600 Series)
• Gas Emissions Test Mode and Sensitivity Check (ABS CAN)
• Reset Learned Values (MFI CAN)
• Zero Calibration (Some OCM CAN)
• SAS Initialization (SAS CAN)
• Steering Angle Initialization and Operation Test (ACD CAN)
• Air Bleed and Lateral G Sensor Initialization (ACD CAN)
• Service Interval Reset (Meter CAN)
• Tire Pressure Sensor ID Check (TPMS CAN (Front Only))

The Asian ScanTool Bundle #SP06 Includes:

• ProLine Interface (ST06)
• Enhanced Expansion for Toyota, Scion & Lexus (EI03)
• Enhanced Expansion for Mazda (EI05)
• Enhanced Expansion for Nissan and Infiniti (EI06)
• Enhanced Expansion for Honda & Acura (EI08)
• Enhanced Expansion for Hyundai and Kia (EI09)
• Enhanced Expansion for Subaru (EI12)
• Enhanced Expansion for Mitsubishi (EI15)

What AutoEnginuity's Scan Tool can do:

• Save, print, read and clear Stored and Pending P, U, B, and C Trouble Codes. Supporting P0 - P9 generic and manufacturer specific codes (including the new lettered codes (e.g., P06A0)
• The largest manufacturer specific trouble code library of all PC/PDA-based scan tools (30,000+)
• Read and clear Freeze Frame data
• View live vehicle sensors in a meter, graph, or grid format
• View oxygen sensor live data and test results
• View all 11 Inspection/Maintenance systems and Mode 6 data
• Unlimited logging of live vehicle sensors in TXT, XML, or CSV (1ms logging accuracy)
• Playback your data logs for offline analysis
• Run and query specific component and system tests. Support for generic and enhanced bi-directional tests
• View generic and manufacturer enhanced data on the same tool
• English or Metric (SI) units of measure supported
• Configure your sensors' ranges, scaling value, audible alert triggers, units, and sampling rate
• Savable configurations. Set up the interface to suit your preferences and save it so you never have to do it again
• Supports 1996 and newer passenger vehicles, whether it be domestic, Asian, or European.
• SAE interfaces: J1850 (PWM and VPM), ISO-9141-2, ISO-14230 [KWP2000], and CAN [11bit and 29bit]

Coverage on Demand:

It's a powerful concept pioneered by AutoEnginuity that allows you to purchase enhanced options as you need them. Since enhanced interfaces are software-based updates for our ScanTool line that, once purchased, can be activated through email. There is no extra installation or special hardware necessary. The enhanced interfaces come with free updates for the first 12 month period. There is no annual license fee and you can transfer your license to another PC if necessary. For another 12 months of updates, the cost is $100.00 USD. You are not required to purchase updates and can continue to operate the existing enhanced version for as long as you'd like. We release an average of 4 updates per 12 month period.

Legend

²Windows Mobile and Palm-based version not available.

³Enhanced interface comes with a special cable adaptor.